Low cost high performance with 6 pins brush module USB to TTL Microcontroller Programmer.
- Programming of Arduino Pro Mini
- Programming of Microcontrollers that can be programmed using serial boot loaders at 3.3V or 5.0V logic levels
- Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU
- Data exchange between microcontroller and Desktop or Laptop Computers
- Connection with GPS Devices
- Connection with various external Phones, or modems, GSM Modules
- All other applications requiring USB/Serial/TTL interface.
- Router,HDD,ADSL,broad band modem firmware upgrade
- Cellphone,XBOX360,GPS serial communication,vehicle inspection and test, dvd flash and so on
- Simple UART communication,commonly used UART debugging tools in supper terminal
- USB signal transferred to TTL signal,may be used by electronic enthusiasts
- Two data transmission indicator can monitor data transfer status in real time
- 3.3V and 5V power supply interface,easy for the DDWRT of different voltage system that need power.
- The entire board is coated by high quality transparent heat-hrinkable sleeve,making the PCB in insulation state from outside, so that the board won’t burnt down by material short-circuit.
- Chip Used: CH340G
- Chip Datasheet: https://www.insidegadgets.com/wp-content/uploads/2016/12/ch340g-datasheet.pdf