This is a clone of the Arduino Pro Mini with the ATmega328P MCU at 5V and 16MHz.
This board does not have a USB to UART/serial converter so you will need to use another Arduino or a USB to serial converter module such as our CP2102 serial module to flash this board.
- Red LEDs to indicate power and D13
- On-board manual reset button
|Microcontroller||ATmega328P at 16MHz|
|Input Supply Voltage||5-12V|
|Digital I/O Pins||20 (Tx, Rx, D2-D13, A0-A5)|
|Analog Input Pins||8 (A0-A5 can also be used as digital I/O pins)|
|I/O Pin DC Current Capability||40mA|
- 1 X ATMEGA328P Pro Mini
- 1 X 6 pin right-angle male header
- 2 X 12 straight male header pins