For fast transaction call 0916.457.0748

Tutorial RSS

In this tutorial, we will tackle on how you could send infrared signal using KY – 005 Infrared Transmitter Sensor and receives it via KY – 022 Infrared Receiver sensor. A signal to turn on a LED via this module. Things you’ll need: 2pcs Arduino UNO Rev 3 2pcs Arduino UNO Power Cable 2pcs Breadboard 1pc KY – 005 Infrared Transmitter Sensor 1pc KY – 022 Infrared Receiver Sensor 1pc LED 1pc Tactile Switch 2pc 220 ohms Resistor Connecting Wires Hardware assembly             Schematic Diagram                              ...

Read more

This project will demonstrate how to use the Color Recognition Sensor, its configuration, wiring and how would it work using Arduino. Color Recognition Sensor distinguish color by reading wavelengths of the light they reflect, emit and transmit. This device can be integrated in a monitoring systems for its high accuracy.   Color Recognition with Arduino UNO R3 Things you’ll need: Color Recognition Sensor TCS230 Arduino UNO R3 LED ( Red, Blue, Green ) 3pcs 220 ohms Resistor Uno R3 Sensor shield V5.0 Breadboard Connecting Wire Mounting your Uno R3 Sensor shield V5.0 to your Arduino UNO R3. Click here. Schematic Diagram: Connections...

Read more

This project will show us how to use the Ultrasonic Distance Sensor, its configuration, wiring and how would it work using Arduino An Ultrasonic sensor is a device that can measure the distance to an object by using sound waves. It measures distance by sending out a sound wave at a specific frequency and listening for that sound wave to bounce back. This project can be embedded in such project that requires distance measuring. Ultrasonic Distance Measuring with Arduino UNO R3 Things you’ll need: Arduino Uno R3 Ultrasonic Distance Sensor Uno R3 Sensor shield V5.0 Breadboard Connecting Wire   Mounting your Uno R3...

Read more

This project will teach us how to use the PIR Motion Sensor, its configuration, wiring and how would it work using Arduino Technology. PIR Motion Sensor is a sensing device that detects moving objects, particularly people. This device is often integrated as a component system which automatically detect motion in a certain area. Motion Sensing with Arduino UNO R3 Things you’ll need: PIR Motion Sensor Arduino UNO R3 Uno R3 Sensor shield V5.0 Power Cable LED 220 ohm Resistor Breadboard Connecting Wire   Mounting your Uno R3 Sensor shield V5.0 to your Arduino UNO R3. Click here. Schematic Diagram:   Connections...

Read more

In this tutorial, you can use the ATMEGA328P-PU without the UNO Board. Installing Bootloader is a key for you to use it independently. Please follow the instruction below:   Things you’ll need: ATMEGA328P-PU Arduino UNO 60Hz Oscillator 10Kohm Resistor Breadboard Connecting Wire   First, we just need to familiarize the ATMEGA328P datasheet which can be found in our store ATMEGA Kit and click the downloadable files. Basically, there are lot to read so here are the most important things, the pin out of the ATMEGA.     Loading Arduino ISP Connect your Arduino UNO to your computer. Select board and...

Read more

Payment Methods

Facebook Rewards Program